• Reparation and technical maintenance of the appliance or line cord are just allowed
to be accomplished by an authorised specialist reparation shop.
• Do not use the appliance if it is damaged or units of the appliance are damaged.
Do not use the appliance if it does not function properly or if it was excessively loaded. The
appliance is likely damaged if the appliance or units of the appliance show cracks, exorbitant
wearing down, alterations or leaks. It is also likely damaged if the drive wheel of the motor base
moves slowly. Do not use the appliance if the rotating sieve is damaged. Take the appliance
for technical maintenance and repair to an authorised specialised reparation shop.
• Only use units, spare parts and supplies which are provided and recommended by
the manufacturer. Damaged or improper units may break in use, damage the appliance
or cause injury.
• Do not push products into the feed chute with your fingers or foreign objects.
Always use the food pusher provided.
• Do not touch the small cutting blades in the base of the stainless steel filter basket.
• Always make sure the appliance is properly and completely assembled before connecting to
power outlet and operating. The unit will not turn ‘ON’ unless properly assembled.
• Do not let the motor run permanently for longer then 7 minutes to avoid overheating.
• Do not operate the appliance continuously on heavy loads for more than 1 minute.
The Design Juicer Advanced Pro is fitted with a safety device which safeguards against
overheating with excessive loads. If this occurs, the Juicer will automatically activate the
overload protection button and the unit will switch itself off. If this occurs turn the power
OFF at the power outlet and allow the unit to cool. Then press the overload protection
button found on the bottom of the motor base. The safety device will then be reset and
the Juicer is ready for use again.
• While proceeding Do not push the food pusher too hard down. Empty the pulp container
and juice jug in time to avoid run-over and splatter which might causes damages to the
appliance. When proceeding hard or stringily food or if you press the stamp down too
hard the motor could stop or slow down. In this case turn off the appliance immediately
and pull the plug to avoid overheating. Operate according to the instructions ´Trouble
shooting guide`.
• Do not leave food leftovers dehumidify on the appliance or units of the appliance.
If pulp dehumidifies on the micro mesh filter it may clog the fine pores of the micro mesh
filter thereby lessening the effectiveness of the juicer. Remove such dirt immediately and operate
according to the instructions ´Care and cleaning` before you continue to proceed.
• Never clean or operate the appliance or units of the appliance with abrasive or hard
sharp-edged items.
• Never clean the motor block in the dishwasher.
• Never use force operating the appliance to avoid damage of the units of the appliance.
4
40133_DesignJuicerAdvancedPro_manual_english_Jan09.qxp 24.02.2009 14:47 Seite 4
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce